top of page

DJI MATRICE 350 RTK

An upgraded flagship drone platform, the Matrice 350 RTK sets a new benchmark for the industry. This next-generation drone platform features an all-new video transmission system and control experience, a more efficient battery system, and more comprehensive safety features, as well as robust payload and expansion capabilities. It is fully powered to inject innovative strength into any aerial operation.

H20N

55-Min Max Flight Time [1]

IP55 Rating [2]

DJI O3 Enterprise Transmission

DJI RC Plus

400 Battery Cycles [3]

6-Directional Sensing & Positioning

Night-Vision FPV Camera

Multi-Payload Support

Specs

Powerful Payloads [8]

The Matrice 350 RTK supports a single downward gimbal, dual downward gimbals, [11] and a single upward gimbal, [11] and can carry three payloads simultaneously. The aircraft also has an E-Port open interface and a max payload capacity of 2.7 kg, meeting the needs of different operation scenarios like public safety, inspection, and mapping.

Zenmuse L2
Zenmuse P1

Zenmuse L2

Zenmuse L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition.

Zenmuse P1

Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.

New Dual-Battery System

The Matrice 350 RTK is equipped with a new TB65 dual-battery system, which supports battery hot swapping and allows for multiple flights without powering off. The battery can be charged up to 400 cycles, [3] reducing the cost of a single flight.

Hot swap TB65
LiDAR
LiDAR

Weight (with propellers, without accessories)

DJI Mavic 3E: 915 g

DJI Mavic 3T: 920 g

Max Takeoff Weight

DJI Mavic 3E: 1,050 g
DJI Mavic 3T: 1,050 g

Dimensions

Folded (without propellers): 221×96.3×90.3 mm (L×W×H)
Unfolded (without propellers): 347.5×283×107.7 mm (L×W×H)

Diagonal Distance

380.1 mm

Max Ascent Speed

6 m/s (Normal Mode)
8 m/s (Sport Mode)

Max Descent Speed

6 m/s (Normal Mode)
6 m/s (Sport Mode)

Max Flight Speed (at sea level, no wind)

15 m/s (Normal Mode)
Forward: 21 m/s, Side: 20 m/s, Backward: 19 m/s (Sport Mode) [2]

Max Wind Speed Resistance

12 m/s [3]

Max Take-off Altitude Above Sea Level

6000 m (without payload)

Max Flight Time (no wind)

45 mins [4]

Max Hover Time (no wind)

38 mins

Max Flight Distance

32 km

* Please check and strictly abide by local laws and regulations before flying.

** All data was tested with a production model Matrice 350 RTK in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.

*** All videos and images on this page were shot in strict compliance with relevant local laws and regulations.

**** Before use, Matrice 350 RTK must be activated via the DJI Pilot 2 app.

 

1. Measured with Matrice 350 RTK flying at approximately 8 m/s without payloads in a windless environment until the battery level reached 0%. Data is for reference only. Please pay attention to reminders in the app for the actual usage time.

2. Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.

3. Up to 400 cycles if the accumulative duration of battery level ≥ 90% is less than 120 days within 12 months.

4. Measured with the 2112 High-Altitude Low-Noise Propellers and the takeoff weight ≤ 7.2 kg.

5. Dual Operator Mode required.

6. Measured with FCC compliance in an unobstructed environment with low interference at a flight altitude of approximately 120 m. Data is for reference only. During your flight, please pay attention to reminders in the app.

7. There are certain blind areas of visual sensing and infrared sensing. Positioning and obstacle-sensing performance may be affected by the flight environment and obstacle characteristics. Please fly with caution.

8. Sold separately.

9. Please enable the radar obstacle avoidance function in the DJI Pilot 2 app and set the aircraft safety distance (> 2.5 m is recommended), and the flight speed should be < 10 m/s.

10. Measured when the radar reflection cross-sectional area of the detection target is ≥ 0.4 m². The effective detection range may vary with the size and material of the obstacle.

11. Gimbal connector is sold separately.

12. This function requires the remote controller to connect to the Internet and download DEM files.

13. This function requires Zenmuse P1.

14. DJI FlightHub 2 required.

15. This function requires the Zenmuse H20 Series payloads.

16. The accessories in this section can also be used with the Matrice 300 RTK.

17. Measured with CE compliance.

18. The aircraft comes with E-Port, while SkyPort and X-Port components are sold separately.

bottom of page